Unless you work in the refrigeration industry or specialize in winery equipment installation in Eugene, OR, knowing all of the parts in your commercial fridge might not seem to be all that important. However, that’s not the case. More often than not, we find it’s beneficial for owners to understand how their refrigeration system operates.

There are quite a few parts that must work in harmony for your refrigeration equipment to function properly. Continue reading to learn a little bit more about all of the essential components:

• Compressor: Because it pumps the gas around the refrigeration system tubing, the compressor is known as the heart of your fridge. When it stops working, your unit will be down for the count.
• Condenser: The condenser is tubing that’s warmed by the heat that’s removed from the fridge. It also allows warm gas to cool before it’s pumped back into the unit. Again, when this fails, you’ll need to hire a technician to fix or replace it.
• Condenser fan motor: The heat transfer mentioned above is aided by a fan, which forces air through the condenser. Fan motors must be replaced from time to time, as they get less effective as they age.
• Evaporator: The evaporator is essentially responsible for making the food or beverages in your fridge cold. As refrigerant gas is pumped into the evaporator, it turns from liquid to gas and cools the area around it.
• Evaporator fan: The evaporator fan is located inside the freezer section. It’s responsible for circulating cold air in the freezer and blowing it into the fresh food section. At the same time, the fan sucks cold air from the fresh food section and re-cools it in the freezer.
• Cold control: Also known as a temp thermostat, the cold control ensures the temperature within the unit remains at a constant level. It uses sensors to do this, and when those sensors fail, you’ll need to call a technician to adjust or replace them.
• Defrost thermometer: The defrost thermostat is a switch that’s located in the evaporator coils. When the coils reach a certain temperature, the switch will turn on and start a defrost cycle. Defrosting is critical for proper winery equipment installation in Eugene, OR, so hire a technician to make a repair if your thermostat isn’t working.
• Defrost heater: As the name suggests, the defrost heater is responsible for actually defrosting once the thermostat has been switched on. It is also located in the evaporator coils.
• Defrost drain: When the defroster is doing its job, there will be plenty of water runoff as a result of the melted frost. The defrost drain is in charge of carrying the melted water away from the heater and into the condensing tray.

Call our team if you’re having refrigeration problems

When your refrigeration system starts to fail, hire American Refrigeration Inc. to fix it. On top of performing winery equipment installation in Eugene, OR, we’re the trusted team for making refrigerator repairs. Our technicians can quickly identify the source of the problem and either repair or replace the malfunctioning part.