The buildup of ice is one of the most common problems people have to deal with when managing a walk-in freezer. Icing not only makes it more difficult for the machinery to operate efficiently, but it could also create excess humidity and moisture that affects the freshness of the food being stored inside the freezer.

If you’re going to be able to perform high-quality walk-in freezer repair in Eugene, OR for an icing problem, it’s important that you understand why icing happens inside these freezers.

The main issue in most cases is that somehow, warm, humid air is getting into your walk-in freezer. The combination of this air leak with the cold ambient air temperatures in the freezer makes for a buildup of ice. This could be a result of the door not being sealed properly due to damaged or worn-down gaskets—an improper seal makes it easy for air to enter through the door. Faulty hinges could be preventing the door from closing properly, and employees might be leaving freezer doors open while restocking items, letting in large amounts of air that make problems with icing significantly more likely.

It’s also important to consider where in the freezer the icing is at its worst. For example, ice buildup near an evaporator coil could be a result of failures with the system fan delay relays. This is a bit more difficult of an issue to resolve, and will likely require the service of a professional technician. There might also be issues with drain lines becoming clogged, which could cause water to pool near the drain and freeze up.

The final potential problem that could cause your walk-in freezer to have icing issues could be aging insulation. Insulation panels can actually start to accumulate ice as they get old, so if your freezer is more than 10 years old, there’s a chance it’s no longer being insulated as effectively.

Preventing icing from becoming a major issue with your freezer

It’s important to prevent ice buildups in your freezer so you do not damage the food you’re storing or any of the important mechanical systems that help your freezer run. By preventing icing, you’ll also save quite a bit of money over time on energy, because your freezer won’t have to work as hard to compete with the excess warmth and humidity that’s getting into it.

You should, therefore, regularly check all door gaskets, hardware and seals to make sure that you don’t have an air leak around the door edges. Check the drains in the floor to make sure they’re not backed up, and make sure your insulation panels are in good condition. Make any necessary repairs as they arise to prevent these issues from becoming more significant and inconvenient than they need to be.

Having an ongoing maintenance schedule with your walk-in freezer is another great way to make sure it stays in good condition. For more information about setting up regular appointments for walk-in freezer repair in Eugene, OR, contact American Refrigeration Inc. today.