The buildup of ice is one of the most common problems people have to deal with when managing a walk-in freezer. Icing not only makes it more difficult for the machinery to operate efficiently, but it could also create excess humidity and moisture that affects the freshness of the food being stored inside the freezer.
If you’re going to be able to perform high-quality walk-in freezer repair in Eugene, OR for an icing problem, it’s important that you understand why icing happens inside these freezers.
The main issue in most cases is that somehow, warm, humid air is getting into your walk-in freezer. The combination of this air leak with the cold ambient air temperatures in the freezer makes for a buildup of ice. This could be a result of the door not being sealed properly due to damaged or worn-down gaskets—an improper seal makes it easy for air to enter through the door. Faulty hinges could be preventing the door from closing properly, and employees might be leaving freezer doors open while restocking items, letting in large amounts of air that make problems with icing significantly more likely.
It’s also important to consider where in the freezer the icing is at its worst. For example, ice buildup near an evaporator coil could be a result of failures with the system fan delay relays. This is a bit more difficult of an issue to resolve, and will likely require the service of a professional technician. There might also be issues with drain lines becoming clogged, which could cause water to pool near the drain and freeze up.
The final potential problem that could cause your walk-in freezer to have icing issues could be aging insulation. Insulation panels can actually start to accumulate ice as they get old, so if your freezer is more than 10 years old, there’s a chance it’s no longer being insulated as effectively.
Preventing icing from becoming a major issue with your freezer
It’s important to prevent ice buildups in your freezer so you do not damage the food you’re storing or any of the important mechanical systems that help your freezer run. By preventing icing, you’ll also save quite a bit of money over time on energy, because your freezer won’t have to work as hard to compete with the excess warmth and humidity that’s getting into it.
You should, therefore, regularly check all door gaskets, hardware and seals to make sure that you don’t have an air leak around the door edges. Check the drains in the floor to make sure they’re not backed up, and make sure your insulation panels are in good condition. Make any necessary repairs as they arise to prevent these issues from becoming more significant and inconvenient than they need to be.
Having an ongoing maintenance schedule with your walk-in freezer is another great way to make sure it stays in good condition. For more information about setting up regular appointments for walk-in freezer repair in Eugene, OR, contact American Refrigeration Inc. today.
Commercial freezers are essential appliances for a variety of different businesses and industries. Restaurants, hospitals, hotels and a range of other establishments couldn’t function without a commercial freezer. Unfortunately, freezers tend to run into some issues that necessitate the help of commercial freezer services in Eugene, OR. Continue reading to learn more about these services.
What to look for in a commercial freezer contractor
If you thought every company in the commercial freezer industry is the same, think again! Some are much better and much more competent than others. Here are a few things you should look for in a quality contractor:
Fair prices: Your commercial freezer is an essential aspect of your business, but you don’t want to spend a fortune on it if it can be avoided. Shop around to find the contractor who will offer you the best prices. At American Refrigeration Inc., you can rest easy knowing that you’re getting the best bang for your buck when you work with us.
Fast response time: You can’t be waiting around for too long when your freezer is down. You’ve got perishable goods that will go bad if the freezer isn’t up and running soon. Make sure you call a company like ours that can send someone out right away to fix your freezer if it breaks.
Wide range of services: It’s kind of silly to have to call one company to install a freezer, another to repair it and a third to tune it up. Instead of figuring out which contractor to call, choose one that specializes in all aspects of the commercial freezer industry. At American Refrigeration Inc., we can handle all of your freezer needs.
Services we offer
As mentioned above, we don’t think it makes much sense to need to have the phone number for a few different commercial freezer contractors. That’s why we’re pleased to be your one-stop shop for all of your freezer needs! Be sure to give us a call if you need any of the services below:
Installation: Did your old freezer finally bite the dust? Are you in the market for a larger freezer to accommodate your growing business? Look no further than American Refrigeration Inc. We carry all of the top brands in all sizes to meet your needs.
Repairs: Over time, your freezer is bound to run into some issues like running too warm, or even not running at all. When that happens, make sure you call us first. We’ll be on the scene as soon as possible to fix whatever went wrong.
General maintenance: The best way to avoid those repairs in the first place is to schedule routine maintenance. Our professionals can thoroughly inspect, clean and tune up your freezer to ensure that it operates as intended.
Be sure to choose our team at American Refrigeration Inc. the next time you need commercial freezer services in Eugene, OR. We can handle all of your refrigeration concerns, regardless of the make, model or size of your appliances. Give us a call today to learn what we can do for you!
Commercial freezer equipment is designed to meet high standards of performance, durability and reliability, but these systems won’t last forever without running into any problems. At some point or another, you will likely experience issues that require commercial freezer repair in Eugene, OR. When that happens, it’s important that you know the proper ways to assess and address the issue to get your equipment working effectively again. Understanding a few of the most common issues with commercial freezers can help you ensure that you know what to do when your equipment experiences problems:
Fluctuating temperatures: If you can’t control the temperature in your commercial freezer and you notice consistent temperature fluctuations from day to day, it’s a clear sign that there’s something wrong with your equipment. One of the reasons why your freezer might not be cooling as it should is because it is positioned improperly. Check to ensure that your equipment is placed a few inches from your wall so that air can flow to promote the cooling process. You should also inspect your freezer doors to check for worn gaskets that are preventing an airtight seal.
Inconsistent power: If you’re dealing with frequent power supply problems that affect your commercial freezer, it’s possible that there’s something wrong with your system’s electrical components or connections. Electrical components can be dangerous to work with, even if you have some experience with electrical repairs, so it’s always best to hire a professional to help you with these problems. They will be able to address the root cause of the problem and safely perform maintenance and repairs to solve the issue.
Lighting issues: Flickering lights or lights that don’t come on when you open your freezer door may be caused by burnt-out bulbs. If there are only a few lights that aren’t coming on in your commercial freezer, you can simply replace those individual bulbs or lighting strips, but if none of your lights are coming on, It’s likely that there’s a problem with your electrical components. Either way, you can always consult a professional to assist you with repairs.
Ice accumulation: The evaporator fan in your commercial freezer is designed to promote proper airflow and circulation and prevent ice accumulation. If this fan stops working, you may notice excessive ice buildup in your commercial freezer that can prevent proper cooling and temperature moderation. Issues with evaporator fans may be caused by clogs in drain lines, or the charge of your evaporator fan may be low. These issues can be addressed with simple repairs from a professional commercial freezer technician.
Schedule commercial freezer repair in Eugene, OR
When you need commercial freezer repair in Eugene, OR from a professional team that you can count on, reach out to American Refrigeration Inc. Since 1995, we have been proud to provide comprehensive commercial refrigeration services to keep businesses operating at optimum levels of performance and efficiency. You can find out more about all of the services that we have to offer and get started with a complimentary quote and consultation by giving our team a call today.
Are you looking for ways to enhance your business? Purchasing the right commercial freezers in Eugene, OR could be the perfect solution. Specifically, blast chillers or freezers offer several benefits that can increase your efficiency and boost your bottom line.
If you’re considering investing in a blast chiller or freezer, review the following perks to decide if it is the right investment for you. For additional information, contact your local commercial freezer experts:
Rapid cooling: Blast chillers or freezers decrease temperatures rapidly. This minimizes the loss from evaporation. It also decreases the size of ice crystals. When large ice crystals form, they can damage food when it is defrosted. The excess moisture causes poor texture and flavor.
Seasonal purchases: Would you like to invest in seasonal items when you can get them at the best price? This is often difficult impossible due to lack of storage options. Blast chillers or freezers can allow a business to purchase items to freeze for long periods of time. They store and thaw well while retaining their freshness.
Loss reduction: One of the most concerning expenses for commercial kitchens is inventory loss. Blast chillers and freezers allow owners to increase storage efficiency and reduce this loss. The final result is a better bottom line.
Baked goods: Have you ever tried to freeze a pie? When it is thawed, it probably lost its flaky texture and its crust fell flat. Blast chillers or freezers cool baked goods rapidly so they retain their shape.
Baked pasta: When pasta is not immediately paired with sauce, it can suffer. Storing it for future use can be tricky. The right commercial freezers in Eugene, OR can make freezing pasta a cinch. Blast chillers or freezers cool pasta quickly to prepare it for future sauces and braises.
Smooth ice creams: Few things can compare to a perfectly smooth ice cream or sorbet. In fact, these products often must have the right consistency to properly create dessert recipes. Due to their ice crystal reduction, blast chillers and freezers allow you to make extra smooth and creamy sorbets and ice creams.
Chilled drinks: Do you ever store drinks at room temperature? Since the customer is expecting a chilled beverage, it’s good to have an option to quickly cool your inventory. Blast chillers and freezers are perfect for quickly cooling down your back stock and providing the refreshing beverage your customer wants.
Fresh seafood: Do you serve mussels, oysters or clams? With blast chillers and freezers, shellfish can be frozen and then thawed to serve. Your customers will never know the difference. Using this “cryo-shucking” method, the seafood tastes as fresh as it did the day it was caught.
Boost Your Business
Would you like to learn more about commercial freezers in Eugene, OR and how they can boost your business? Contact American Refrigeration Inc. today. Our freezer experts have been serving the area with honesty and integrity since 1995. With decades of experience, we offer unparalleled service and products. Reach out to us today with any questions!
Every now and then your commercial freezer is likely to have an issue that requires some repairs—this is just a fact of life when dealing with such large, energy-consuming equipment. However, you can lessen the likelihood of needing significant repairs at any given time by staying on top of your ongoing maintenance, just like you do with a car.
With this in mind, here are some tips for better ongoing maintenance of your commercial freezers in Eugene, OR:
Clean your freezer: Always keep your freezer clean. A simple mixture of water and soap will do just fine—the use of harsh chemicals could result in your doing some damage to the metal surfaces or some of the other fixtures inside the freezer. If any spills occur, make sure you clean them up quickly to prevent them from freezing and causing damage (or just being unsanitary).
Clean the parts: Cleaning the plastic and metal surfaces isn’t enough—you should make it part of your maintenance routine to clean some of the individual parts of the equipment as well. Blades and evaporator fan coils, for example, should be cleaned once a quarter. This also gives you a good opportunity to inspect them for damage so you can replace them as needed.
Check the condensing unit: Add regular checks of the condensing unit to your routine, and never allow any garbage or other debris to collect across the walk-in area.
Check the doors: Door seals and hinges are extremely important in cooling and freezing units, because they prevent warm air from getting in and cold air from getting out. The hinges should all be properly lubricated to ensure they open and close smoothly without any issues. The seals should close properly to create an airtight seal. Never keep the door propped open for any prolonged period of time, and always make sure the door closes tightly. Seals and hinges should be replaced as soon as possible if they develop any noticeable wear and tear or if they are no longer working as they are supposed to.
Track the temperature: Keep a log of your freezer temperatures and note any fluctuations. These fluctuations could be a sign that there’s something malfunctioning in the freezer system. Many systems allow you to store a temperature history for up to 10 years, which can help technicians to search for patterns in this history and diagnose a potential problem.
Develop a relationship with your maintenance technician: Having a good relationship with your maintenance technician will make it easier for you to create a good scheduled maintenance program that keeps all of your equipment operating in optimal condition. Plus, your technician will get familiar with your system and know when something is not operating as it should be.
Looking for more tips about how to keep your commercial freezers in Eugene, OR in great condition for many years to come? Contact the team at American Refrigeration Inc. today and we’ll be happy to answer any questions you have.
